Re: repairing deep scratc

Posted by Dave S on Sep 4, 2005

If it were mine, I'd test one area first......Sand off / remove the varnish down to the epoxy first. Sand the scratched area lightly and brush on some thinned eposy so it penetrates the scratch to the wood. When cured, a regular coat of epoxy and then finish as normal. For bondng purposes, it is imperative that you get all the varnish off wherever you are going to re-finish

Good Luck Dave

In Response to: repairing deep scratches by Jim Raffini on Sep 4, 2005


No Replies.