Re: Suitable workbench

Posted by craig on Jul 13, 2005

I had limited space to deal with, so I cut a piece of ply into 3 pieces and tyed them all together with 2 x 4's. I set this on my saw horses(convertable-1" strap was attached to the bottom of cut-outs that the top piece slipped in. If you have room a 2' wide table would be nice and go about 2' longer than your boat.Don't get too extravagent, because after you glue up the scarfs and shear clamps, and drill the holes most of will end up as yard art with all sorts of neat epoxy scribbles on it.

In Response to: Re: Suitable workbench by mike noeske on Jul 13, 2005


No Replies.