Re: weight reduction tech

Posted by terry on Jun 2, 2005

Frank about said it all. I use 3/4"x1/2" stock for the shear clamps, and avoid extra layers of glass at the ends in favor of brass rub strips.

Not sure if I'd recommend 3mm for the hull panels in a boat so long and narrow as the sport tandem.

My wife and I paddled the prototype in MD a few years ago. A very fast and lovely boat.

In Response to: Re: weight reduction tech by John Foster on Jun 2, 2005

Replies:

• Re: weight reduction tech by J.Schott on Jun 2, 2005
  • please send/post pictures by Howard on Jun 2, 2005
    • Re: please send/post pict by J.Schott on Jun 3, 2005
      • Re: please send/post pict by Paul on Jun 4, 2005
      • Narrowing by Howard on Jun 4, 2005
  • Re: weight reduction tech by Kyle T on Jun 3, 2005
    • Re: weight reduction tech by LeeG on Jun 4, 2005
      • Re: weight reduction tech by Kyle T on Jun 4, 2005
        • Re: weight reduction tech by LeeG on Jun 4, 2005
        • Re: weight reduction tech by LeeG on Jun 4, 2005
          • Re: weight reduction tech by LeeG on Jun 4, 2005