Builders' Forum Archives |
Re: spring back of flush
Posted by patrick forrester on May 25, 2005
Before I can fully comment we have to know if there is spring back in a laminating 2 4mm ply wood hatch covers.
The kit makes no mention of this.
If 2 4 mm hatches do not spring back, I guess it is becuase there is a larger surface area.
Anyway I really want to know if there is spring back.
I am tempted to sand down my jig to reduce the radious just a little. If it hurts it will not be noticible.
I am really hoping to hear from somebody with some experience in this.
http://www.virtualboss.net
In Response to: Re: spring back of flush by LeeG on May 25, 2005
Replies:
- Re: spring back of flush by LeeG on May 25, 2005
-
Re: spring back of flush by patrick forrester on May 25, 2005
- Re: spring back of flush by FrankP on May 26, 2005
- Re: spring back of flush by Dennis Rioux on May 25, 2005
-
Re: spring back of flush by patrick forrester on May 25, 2005
- Re: spring back of flush by George K on May 25, 2005
- Re: spring back of flush by CLC on May 25, 2005
-
Re: spring back of flush by patrick forrester on May 25, 2005
- Re: spring back of flush by LeeG on May 25, 2005
- Re: spring back of flush by George K on May 26, 2005
- one spring back formula by BobE on May 25, 2005