Re: WR 18 ring bulkheads

Posted by Cliff Herring on Apr 21, 2005

I started at the ends and worked toward the middle. Still had to clamp to get the ends straight.

As for the ring bulkheads, I cut out a good amount. After the deck was on, I looked in the aft compartment and realized that I should have cut more, which I did by stretching and reaching. Ended up more like a deckbeam. Definitely cut out most of it before you install the deck. Not easy to do after the fact.

In Response to: Re: WR 18 ring bulkheads by M Davis on Apr 20, 2005

Replies:

No Replies.