Re: Deck Glass/Hull overl

Posted by Doug Judd on Mar 25, 2005

Pat, I followed the CLC manual and video and did an overlap of about 1.5". There are lots of threads here about taping to minimize fraying, etc., but I simply did the lap, let the epoxy cure and cleaned up all the strays with my scraper and sand paper. And I did a bright finish.

Terry has a really slick idea for using brass strips for the launching/beaching protection. I'm certain he would be amenable to sending you an email with his process.

In Response to: Deck Glass/Hull overlap by Shuswap Pat on Mar 25, 2005


No Replies.