Re: final epoxy coats

Posted by Vic F on Mar 13, 2005

Thanx... I just found that and the "Epoxy book " on the System three web site. Tell me, how do you "tip out" the bubbles with a brush? I have not been able to find that anywhere. And if I already have some bubbles and unevenness (I would not really call them runs) should I sand before my final filling coat, or wait till the weave is filled? I guess I better start wearing my glasses when I epoxy.

In Response to: Re: final epoxy coats by Howard on Mar 13, 2005

Replies:

• Re: final epoxy coats by Howard on Mar 13, 2005
  • use squeegee by Vic F on Mar 14, 2005
    • Hmmm, I Like It by Kurt Maurer on Mar 14, 2005
    • Again, I agree. BUT by Charlie Jones on Mar 14, 2005
      • Re: Again, I agree. BUT by Doug Judd on Mar 14, 2005
        • JUST did a recore by Charlie Jones on Mar 14, 2005
          • Re: JUST did a recore by Dave Houser on Mar 14, 2005
    • Re: use squeegee by Howard on Mar 14, 2005
      • Re: use squeegee by Vic F on Mar 14, 2005
        • Re: use squeegee by Mac on Mar 15, 2005