Re: Joining a w river 18

Posted by Petewp on Mar 12, 2005

I tabbed and would do it again. the real pain tho was fully glassing the inside. With so many panel angles - I had a major problem with bubbles and floating the cloth. If I were to glass the inside of a multichine again, Id have cut the sheets into smaller managable sections and overlapped them as they went on. That way the smaller managable sections dont have the "panic-time" of epoxy waiting to kick off and so many bubbles and such to flatten out - it was a real mess.

All said shes as strong as Gibraltar - but - that one procedure was a b-tch.


In Response to: Re: Joining a w river 18 by LeeG on Mar 12, 2005