Builders' Forum Archives |
Re: Foredeck curvature
Posted by Niels G. Mortensen on Mar 5, 2005
Jon, I installed an extra deck beam between the beamlet and the bulkhead; this helped very much in getting a nice shape for the deck.
I used one strap over each deck beam and bulkhead, and then used string to attach the deck to the sheer clamps. I would recommend using string for the deck installation any time; this is a very controllable procedure, especially if you are doing a one-man installation. The link below shows the setup - sorry about the Danish text! -- Niels
Deck installation w/ string
In Response to: Foredeck curvature by Jon Loraine on Mar 3, 2005
Replies:
- Re: Foredeck curvature by Dave Houser on Mar 5, 2005
- Re: Foredeck curvature by Mac on Mar 6, 2005