Re: No 3mm BS1099 for CH

Posted by Greg M. on Dec 21, 2004

I built a Mill Creek 15 with BS6566. The only difference I could see is the thickness of the veneer,1mm on the BS6566 vs 1.5mm on the BS1088. The Mill Creek used 4mm and 6mm plywood. I found that it was very easy to sand through the veneer but otherwise, the 6566 worked fine.

In Response to: No 3mm BS1099 for CH 14 ? by Homer on Dec 21, 2004

Replies:

No Replies.