Re: Fillets

Posted by John Caldeira on Nov 29, 2004

Adding silica dust (Cab-o-sil) in additiion to the wood flour will greatly improve the holding power of a fillet. making it thicker is also necessary, as the earlier replies mentioned.

To remove the sagging fillets, a sharp paint scraper will work well if the epoxy is not fully hardened. If it's only been a few days, sharpen a regular paint scraper with a file or belt sander. It's works much faster than sanding.


In Response to: Fillets by Parke on Nov 28, 2004


No Replies.