Builders' Forum Archives |
Re: VCP Hatch Kit
Posted by Terry Mcadams on Nov 19, 2004
Hey Mac,
I had to retrofit a bulkhead through a small hatch on an old boat for a friend. He's a fisherman and he was afraid his gear would puncture a float bag. Same problem: the bulkhead wouldn't fit. So I cut it in half lengthwise and filleted in the bottom half, flipped the boat over the next day and filleted in the top half, then glassed the joint.
Worked, I guess, as I still have the friend and he still has his boat.
terry
In Response to: Re: VCP Hatch Kit by Mac on Nov 19, 2004
Replies:
- Re: VCP Hatch Kit by Mac on Nov 19, 2004
- Re: VCP Hatch Kit by George K on Nov 19, 2004