Builders' Forum Archives |
The Gougeon's reccommend
Posted by Charlie Jones on Nov 16, 2004
using a propane torch and barely scorching the PVC prior to using the epoxy. I've always just sanded well to get a good place for the epoxy to mechanically bond.
I used a PVC pipe as a stern tube in a trimaran I build 25 years ago, plus I did cockpit drains using PVC epoxied in place. Far as I know that's all still in use.
In Response to: epoxy and PVC? by Aaron J. on Nov 15, 2004
Replies:
No Replies.