Re: Stern carry handles

Posted by Paul on Nov 10, 2004

Craig, I mounted the web type of handle ,across the boat at the front and rear. The rudder control lines go inside it and I,vegot an extra loop of web using the same screw ,to feed the lifting line through. I screwed down into the shear clamp, and all was fine untill a well meaning friend jerked the "fully laden" kayak up , helping me get it up the beach. The ss screw is now coming out . On my Double I used 2 screws in each side ,so far so good. If you have to lift loaded yak, grab it under the hull.

Cheers--- Paul

In Response to: Re: Stern carry handles by Craig Robinson on Nov 8, 2004

Replies: