Re: working on the bottom

Posted by Doug Judd on Sep 10, 2004

Steven, I smoothed and sanded all my chine seams by hand with a block sander and 150 grit after filling the few small gaps with wood flour epoxy.

You are going to end up with a seam that is different in color regardless unless you beveled the panels before stitching. So the best thing to do is aim for a consistent width the length of the boat.

http://mysite.verizon.net/vze8etwu/sitebuildercontent/sitebuilderpictures/wetout.jpg

In Response to: working on the bottom by Steven Laughmiller on Sep 10, 2004

Replies:

No Replies.