Builders' Forum Archives |
Safe handling epoxy/glass
Posted by Michelle Moran on Sep 1, 2004
This is my first time using epoxy or fiberglass and I'm wondering about what's important re: safe handling. I'm assuming that using a mask or respirator when sanding is essential; little glass scraps in your lungs can't be a good thing... But do people really use gloves as advised in the book? Any other major safety issues with working with epoxy or fiberglass?
Thanks!
Michelle
Replies:
- Re: Safe handling epoxy/g by Chris Taylor on Sep 1, 2004
-
Re: Safe handling epoxy/g by Steve Miller on Sep 1, 2004
- I can't build anymore by Steve C on Sep 2, 2004
- Re: I can't build anymore by Mac on Sep 2, 2004
- Re: I can't build anymore by Mark Camp on Sep 2, 2004
- Re: I can't build anymore by LeeG on Sep 2, 2004
- Re: I can't build anymore by Steve C on Sep 3, 2004
- Re: I can't build anymore by Mac on Sep 3, 2004
- Re: I can't build anymore by Mark Camp on Sep 2, 2004
- Re: I can't build anymore by Mac on Sep 2, 2004
- I can't build anymore by Steve C on Sep 2, 2004
-
Re: Safe handling epoxy/g by Mark Camp on Sep 2, 2004
- Re: Safe handling epoxy/g by Craig Robinson on Sep 2, 2004
- Re: Safe handling epoxy/g by LeeG on Sep 2, 2004
- Re: Safe handling epoxy/g by Mark Camp on Sep 2, 2004
- Re: Safe handling epoxy/g by Craig Robinson on Sep 2, 2004
-
Re: Safe handling epoxy/g by Steve Miller on Sep 1, 2004
- people really use gloves by LeeG on Sep 1, 2004
- Re: Safe handling epoxy/g by Mark Camp on Sep 2, 2004
- Re: Safe handling epoxy/g by RogerJ on Sep 2, 2004
- I work with epoxy almost by CharlieJ on Sep 2, 2004
- From a beginner by Jon T on Sep 2, 2004
-
Re: From a beginner by Mac on Sep 2, 2004
- working without gloves by LeeG on Sep 2, 2004
- I learned my lesson by Jon T on Sep 3, 2004
-
Re: From a beginner by Mac on Sep 2, 2004
- Re: Safe handling epoxy/g by FrankP on Sep 2, 2004
-
Re: Safe handling epoxy/g by Mark Camp on Sep 2, 2004
- Re: Safe handling epoxy/g by CARL on Sep 2, 2004
-
Re: Safe handling epoxy/g by Mark Camp on Sep 2, 2004
- info from manufacturers by DaveW on Sep 2, 2004
- Re: Safe handling epoxy/g by Michelle Moran on Sep 3, 2004
- Re: Safe handling epoxy/g by Steve Miller on Sep 3, 2004
-
From a One Time Builder by Mac on Sep 3, 2004
- Re: From a One Time Build by Terry Mcadams on Sep 3, 2004
- Re: From a One Time Build by George on Sep 3, 2004
- Re: From a One Time Build by Terry Mcadams on Sep 3, 2004