Mill Creek Seats

Posted by Curtis Whatley on Aug 24, 2004

I hit a little snag. The plans say to attach the 1" webbing to the sheer clamp and use the cam buckle for adjustment. This leaves a lot open for discussion. Do you make a loop of webbing and then attach both ends of the loop to the sheer clamp? do you attach one end of the webbing to the seat, one end to the sheer clamp, and then cut and insert the buckle in the middle? If anyone can shine some light on this or send me a picture of their solution I would be very grateful. The boat leaves for the lake on Saturday.

Replies:

• Re: Mill Creek Seats by Doug Judd on Aug 24, 2004
  • Re: Mill Creek Seats by Joe Lombardo on Aug 24, 2004
    • Re: Mill Creek Seats by Toby on Aug 25, 2004