Builders' Forum Archives |
Re: scraped cloth
Posted by Howard on Aug 20, 2004
when you are done with sanding and scraping, it often is wise to apply one very thin last coat of epoxy especially if you have exposed some of the cloth (use a roller.....very thin coat...then tip it out with a foam bruach). when dry...rough it up with a 3m pad...wipe it down to remove the dust...then go ahead and paint.
In Response to: scraped cloth by Allan on Aug 19, 2004
Replies:
- Re: scraped cloth by Chris Taylor on Aug 20, 2004
- Re: scraped cloth by Kurt Maurer on Aug 20, 2004