Re: Stitching on inside h

Posted by Doug Judd on Aug 19, 2004

I did the same thing, bending the wire loops against the hull, but I used a blunt tool so as not to break the stitches. If I remember, I used the handle on a pair of pliers.

Taping the fillet areas with masking tape definitely controls the width of the fillet and leaves a clean and uniform edge.

In Response to: Re: Stitching on inside h by Carl Albright on Aug 19, 2004


No Replies.


2 hours
& 46 minutes
left in the Storewide Sale!