Builders' Forum Archives |
Re: Glassing the Deck...
Posted by Chris Taylor on Aug 18, 2004
Just make sure the blade is very sharp and go lightly, pulling gently on the cloth as it comes away from the hull. You'll find the blade need only gently touch the underlying hull. Any cut marks will disappear when you add fill coats and fair the overhang in.
In Response to: Re: Glassing the Deck... by Peter on Aug 18, 2004
Replies:
- Re: Glassing the Deck... by Peter on Aug 18, 2004
-
Re: Glassing the Deck... by Howard on Aug 20, 2004
- Re: Glassing the Deck... by Peter on Aug 22, 2004
-
Re: Glassing the Deck... by Howard on Aug 20, 2004