Re: mounting footbraces

Posted by Dave Houser on Aug 16, 2004

I used a tee-nut and a 2" diameter plywood washer made with a hole saw. With Yakimas I enlarge the hole of match the top of the tee-nut (see pic below). With Keepers I counterbore the hole in the plastic rail to accept the top of the tee-nut.

In Response to: Re: mounting footbraces by Peter on Aug 14, 2004

Replies:

• Re: mounting footbraces by Jay E. Morris on Aug 31, 2004
  • switching over to yakima by Nancy on Aug 31, 2004
    • Re: switching over to yak by LeeG on Aug 31, 2004