Re: Varnish/Paint w/ HVLP

Posted by Joe Aubin on Jul 12, 2004

I think the air volume could be the only tricky part. My compressor can put out 5 SCFM at 40 PSI, but the gun I'm thinking about getting requires 7 SCFM. I have a 15 gallon tank that pumps up to 150 psi, but I know that won't gain me much if anything. I guess I need to do some more research on the equipment. Thanks for the response!

In Response to: Re: Varnish/Paint w/ HVLP by CDR. on Jul 12, 2004

Replies:

• look into a conversion by Charlie Jones on Jul 12, 2004
  • Re: look into a conversio by Joe Aubin on Jul 13, 2004
    • Re: look into a conversio by Mike M. on Jul 13, 2004