Re: Filling glass

Posted by Mac on May 19, 2004

Aaron

Go back in the archives un "Fill Coats" etc. for MANY disertations on this.

Short answer - if rolling use very short nap - 1/8 " white or yellow foam.

Roll slowly to minimize bubbles or tip off with 2" foam brushes - ones with wooden handles.

If you can handle a squeegee, you'll put on less epoxy with no bubbles.

MOST IMPORTANT - NOW PAY ATTENTION!

Have fun!

In Response to: Filling glass by Aaron Johnson on May 19, 2004

Replies:

• Re: Filling glass by Aaron Johnson on May 19, 2004
  • Re: Filling glass by Steve Miller on May 19, 2004