Builders' Forum Archives |
Re: 3 Forces Back, 1 Forw
Posted by Peter Lyons on May 11, 2004
I've heard it's a good job not to put TOO much tension on bow and stern lines. Apparently cars can flex some along their length, but your wood/fiberglass composite yak doesn't much care for bending...
So, if you do use bow and stern lines, don't get TOO zealous jerking 'em tight.
In Response to: Re: 3 Forces Back, 1 Forw by Mac on May 11, 2004
Replies:
No Replies.