Re: if one were to . . .

Posted by LeeG on May 4, 2004

I made a Ch16 with only an aft hatch, no front hatch, no front bulkhead with front float bag. The deck beam sets the deck curve, the aft bulkhead sets the deck curve. To dump water out it'll hit the aft bulkheads and pour out when the bow is lifted. CapeCharles/Patuxents were origninally a no bulkhead/hatches kit. The inclusion of bulkheads and hatches in the kit presents some folks with the awkward option of no hatches and bulkheads.

In Response to: if one were to . . . by mick on May 4, 2004

Replies: