Camper Hardware » Camper Hatch Hardware
Browse required hardware components for the Teardrop Camper Hatch Assembly below. Builders working from plans will need the complete Hatch Outfitting and Hardware Package (contents listed here), which can be added from the Teardrop Camper page.
(2) required for Teardrop Camper.
These 12" - 20" gas springs support the Teardrop Camper's galley hatch when open. The gas springs fasten to sturdy stainless steel brackets bolted to the bulkhead and galley hatch. Gas springs are used to lift, open, hold, and lower hatches,...
(2 pair) required for the Teardrop Camper.
These Strainless Steel Gas Spring Mounting Brackets are designed for gas filled spring lifts with a Pem-Type socket and a 10mm ball. Intended for Attwood brand gas springs and compatible units. Brackets are sold in pairs. CLC Teardrop Camper...
(1 large) required for Teardrop Camper hatch. (1 small) required for TD Storage Box.
Chrome plated zink alloy, made by Perko Marine. Large hasp is used on the Teardrop Camper galley hatch. Small hasp is used on the Storage Box. Dims: Large 3-3/4" x 1", Small 2" x 1" Padlock Clearance: 1/4" Fasteners for CLC...
(20 feet) required for Teardrop Camper.
This special rubber gasket material completes the gutter for the Teardrop Camper galley hatch. The gasket is a tight slip-fit, looping the entire perimeter of the galley gutter.
(3 rolls) required for Teardrop Camper.
This 3/4” by 7/16” self-adhesive high density foam rubber tape is used as a gasket to seal hatches, also know as Hatch Tape. We’ve selected this tape because of its durability and great sealing properties. We've been using it...