New Boatbuilding Supplies from Chesapeake Light Craft.  Marine plywood, lumber, and much more!

Bead and Cove Strips

Bead and Cove Strips

As kits and plans for cedar-strip boat construction grow more accessible to aspiring boatbuilders, we have installed elaborate automated machinery in our Annapolis factory to produce first-rate bead-and-cove cedar strips at reasonable prices. Our...

from $1.80

Galley Hatch Edge Seal

Galley Hatch Edge Seal

(20 feet) required for Teardrop Camper.

This special rubber gasket material completes the gutter for the Teardrop Camper galley hatch. The gasket is a tight slip-fit, looping the entire perimeter of the galley gutter.

$2.98

Actuating Rod

Actuating Rod

(4) required for Teardrop Camper.

These stainless steel actuating rods with flattened and drilled ends are key components in the Teardrop Camper door handle assemblies. Rods are 48" and require minor shaping and trimming.

$2.99

Fillable Caulking Tubes - West System 810

Fillable Caulking Tubes - West System 810

Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Suitable for refilling until epoxy cures. For use with a standard caulking gun. Holds approximately 10 fl. oz.

from $4.98

MAS 12 oz. Dory Model Epoxy Kit

MAS 12 oz. Dory Model Epoxy Kit

We ship this small epoxy kit from MAS with our Model Dory Kits.  The kit includes: 8 oz Flag Resin 4 oz Medium Hardener 8 oz Wood Flour 10 Mixing Sticks 4 2oz Mixing Cups 4 Pair of Gloves

$26.95

Stain - Behlen Solar Lux

Stain - Behlen Solar Lux

New Colors Added! At last!  Wood stain suitable for use with wood-epoxy composite boats.  Click here for Nick Schade's tips on getting the most out of Behlen's Solar-Lux Stain. Solar-Lux Stain is a highly fade- and UV-resistant dye...

from $13.99

West System G/Flex 650 - Toughened Epoxy

West System G/Flex 650 - Toughened Epoxy

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and...

from $22.94

Cyanoacrylate (CA Glue) Accelerator - 2oz

Cyanoacrylate (CA Glue) Accelerator - 2oz

One of the greatest features of CA glue is the quick cure time that can be accomplished when it is used in combination with an accelerator. Simply apply the glue to one surface and spray the accelerator to the other surface. Once the two surfaces...

$6.50

Mahogany - Marine Lumber

Mahogany - Marine Lumber

True mahogany (Swietenia Macrophylla), also known as Honduran mahogany or big-leaf mahogany, has been valued for centuries for its beauty, durability and resistance to decay. Ever-increasing demand put a lot of strain on the mahogany forests of...

from $1.30

Woodzilla by MAS Epoxies

Woodzilla by MAS Epoxies

Woodzilla is an easy-to-use, wood-colored epoxy cartridge from MAS Epoxies. Fast Curing, translucent paste epoxy with unlimited bonding, sealing and filling applications. For use by professionals, homeowners and DIY Hobbyists. Formulated with...

$20.99

Flexi-Tips for CA Glue

Flexi-Tips for CA Glue

Flexi-Tips allow for more precision in application of CA Glue. Package contains 24 disposable tips, to be used with the EZ-Bond CA Glue and Accelerator.   - Creates smaller drops  - Extends into hard-to-reach areas  - Maximum...

$4.99

Cyanoacrylate Adhesive (CA Glue) Medium Viscosity - 2oz

Cyanoacrylate Adhesive (CA Glue) Medium Viscosity - 2oz

Cyanoacrylate Adhesive (also known as "CA glue") is a fast-setting glue, beloved of hobbyists and modelmakers. This is a clear one-component, solvent-free system that does not require a catalyst, heat or clamps. Coat the mating surfaces, and when...

$11.00

Flush Trim Router Bit

Flush Trim Router Bit

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 600 grit wet grind on...

$15.99

Round Over Router Bit

Round Over Router Bit

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 400 grit wet grind on...

$20.99

Inside Handle

Inside Handle

(2) required for Teardrop Camper.

Bright chrome-plated interior handle for the Teardrop Camper door assembly.

$3.99

Door Handle (clockwise)

Door Handle (clockwise)

(1) required for Teardrop Camper.

Small key locking blind mount L-handle with cam and clockwise rotation for one Teardrop Camper door assembly. Matte black powder coated. With a 3/8-24 threaded 2.25" long shaft.

$22.50

Gluzilla by MAS Epoxies

Gluzilla by MAS Epoxies

Gluzilla is an easy-to-use, translucent paste epoxy from MAS Epoxies. Fast Curing, translucent paste epoxy with unlimited bonding, sealing and filling applications. For use by professionals, homeowners and DIY Hobbyists. Formulated with a...

$20.99

Draw Knife - 5

Draw Knife - 5"

An essential tool for building the CLC Wooden Oars from plans and patterns.  This draw knife has a working edge of five inches and is designed to flex slightly around contours.  Perfect when large amounts of stock need to be removed...

$45.69

Door Handle (counterclockwise)

Door Handle (counterclockwise)

(1) required for Teardrop Camper.

Small key locking blind mount L-handle with cam and counterclockwise rotation for one Teardrop Camper door assembly. Matte black powder coated. With a 3/8-24 threaded 2.25" long shaft.

$22.50

Foam Sanding Handblock

Foam Sanding Handblock

3M Stikit Hand Blocks are made of sturdy, durable, high-strength material and are shaped to provide maximum user comfort and control while sanding. Using a hand block eliminates finger pressure marks in the finish by providing even distribution of...

$23.99

3M Adhesive Backed Sandpaper Sheet Roll 2-3/4

3M Adhesive Backed Sandpaper Sheet Roll 2-3/4"

A peculiar product that seems to be available only to professional boatbuilding shops.  We've always had a couple of rolls of this sticky-back paper in our shop, which can be used with flexible fairing boards, hand file boards, soft and...

from $67.99

Canvas Tool Bag with Leather Trim

Canvas Tool Bag with Leather Trim

The Canvas Rigger's Tool Bag is a heavy duty, 24 oz. canvas bag with leather trim, ideal for DIY boatbuilders. Vertical stitching and 24 oz. 100% cotton canvas gives this bag its "Standup Straight Posture" which puts your tools in easy reach....

$34.99

SS Brackets for Gas Springs (pair)

SS Brackets for Gas Springs (pair)

(2 pair) required for the Teardrop Camper.

These Strainless Steel Gas Spring Mounting Brackets are designed for gas filled spring lifts with a Pem-Type socket and a 10mm ball. Intended for Attwood brand gas springs and compatible units. Brackets are sold in pairs. CLC Teardrop Camper...

$5.50

Drain Plug, Bronze

Drain Plug, Bronze

Traditional style bronze screw-in type transom drain plug.  The base has a 2" diameter, with a 1/2" screw-in drain.  This is the plug we use in the transom of our Peeler Skiff.  To insure that water does not penetrate the transom,...

$26.99

CLC StopLossBag Kit

CLC StopLossBag Kit

The StopLossBag™ allows you to preserve the fresh off-the-shelf quality of wood finishes.  A specially formulated 3-ply construction helps prevent loss of solvents while a special gas barrier inhibits oxygen penetration into...

from $7.95

Hatch Hasp by Perko

Hatch Hasp by Perko

(1 large) required for Teardrop Camper hatch. (1 small) required for TD Storage Box.

Chrome plated zink alloy, made by Perko Marine. Large hasp is used on the Teardrop Camper galley hatch. Small hasp is used on the Storage Box. Dims: Large 3-3/4" x 1", Small 2" x 1" Padlock Clearance:  1/4" Fasteners for CLC...

from $14.50

Gas Springs 12

Gas Springs 12" - 20"

(2) required for Teardrop Camper.

These 12" - 20" gas springs support the Teardrop Camper's galley hatch when open. The gas springs fasten to sturdy stainless steel brackets bolted to the bulkhead and galley hatch. Gas springs are used to lift, open, hold, and lower hatches,...

$18.50

Denatured Alcohol (1 quart)

Denatured Alcohol (1 quart)

Denatured alcohol solvent, pure 100% denatured ethyl alcohol.   We use this to clean surfaces prior to applying epoxy, paint, or varnish, and as a wipe-down between coats of epoxy, paint, or varnish.  Also good for cleaning up tools and...

$10.99

Epoxy Filleting Bags

Epoxy Filleting Bags

In stitch-and-glue boatbuilding, epoxy "fillets" are what hold everything together. Whether you are filling the seams on a Lapstitch™ hull or you are bonding bulkheads to the hull shell, you'll be dispensing epoxy...

from $9.50

Rabbeting Bits for LapStitch Boats

Rabbeting Bits for LapStitch Boats

Industrial quality carbide router bits for cutting rabbets in the LapStitch™ Sassafras, Skerry, Eastport Pram, Annapolis Wherry, and Northeaster Dory designs.  Solid steel bodies are precision machined to carefully controlled...

$51.99

Belaying Pin

Belaying Pin

  Traditional belaying pins for traditional smallcraft.  Standard issue in sailing versions of the Southwester Dory, these pins are hand-turned in the USA with oak handles and maple pins.  They feature a 1/2" diameter x 4-1/2" pin...

$10.50

Western Red Cedar Strips without Bead & Cove

Western Red Cedar Strips without Bead & Cove

Most strip-kayak and strip-canoe builders use beads and coves, a sort of tongue-and-groove system milled into the strips, for tight fits and rapid assembly.  But not every strip design benefits from that feature.  Decorative accent...

from $38.00

Samson Mini Braid Cord - Black 4mm

Samson Mini Braid Cord - Black 4mm

With a polyester cover and nylon core Samson's Accessory Cord has excellent flexibility knotting and strength characteristics for a free running, torque-free cord.Breaking Strength:  1,175• Non-fade, highly wear resistant polyester...

$0.75

Replacement Parts for the Drop-in Rowing Unit

Replacement Parts for the Drop-in Rowing Unit

Order replacement parts for your Drop-in Rowing Unit. Click on "More Images" above to scroll through close-up photos of each replacement part. [Drop-in Rowing Unit Assembly Instructions PDF] Wanted: Used Drop-in Rowing Units Do you have a...

from $13.99

CLC Tool Box Kit

CLC Tool Box Kit

The CLC Tool Box is the boatbuilder's interpretation of the classic "tab-and-slot" type, favored by woodworkers for its ease of assembly and flexibility. As the name suggests, the tool box goes together with mortise-and-tenon joints, with two...

$75.00

Carbon Fiber Tape - 3

Carbon Fiber Tape - 3"

We used lot of this building the 31-foot Proa "Madness".  Just the thing for high-strength, high-modulus reinforcement, and it looks cool, too.  3" wide, 5.7 ounce weight.  This is American Made 3" inch wide Plain Weave 100% Carbon...

from $19.90

Carbon Fiber 3K 2 x 2 Twill Weave Fabric - 5.7 oz. 50

Carbon Fiber 3K 2 x 2 Twill Weave Fabric - 5.7 oz. 50" wide

This Carbon Fiber Twill Weave Fabric is ideal for boatbuilders.  It is more malleable than plain weave fabric, with a very high strength-to-weight ratio.  (And it's as strong as...steel.)  Twill weave fabric has an excellent draping...

$46.25

Mineral Spirits (1 quart)

Mineral Spirits (1 quart)

Low odor, quick drying.  May be added to oil base paints, enamels and varnishes for exterior and interior use to thin and control flow rate.  Do not use with synthetic or rubber base enamels or water thinned paints....

$10.99

Neoprene Rubber Gasket - Pre-cut Patterns

Neoprene Rubber Gasket - Pre-cut Patterns

These 1/8" neoprene rubber gaskets are CNC-cut to fit our two take-apart dinghy models and our sectional kayak: the Passagemaker Take-Apart Dinghy, the Eastport Nesting Pram and the Sectional Shearwater Sport. 

from $54.00

Bead & Flute Router Bit Set

Bead & Flute Router Bit Set

Includes 1/4" Bead Cutter and 1/4" Cove Cutter.The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations.  Solid steel bodies are precision machined to carefully controlled...

$44.98