Builders' Forum |
|
↓ Scroll to Last Comment ↓ | Forum Guidelines | Builders' Forum | RSS |
Mast Thwart Knee Placement On Dory
Either mast partner knee can go on the Dory on either side but one end is longer so how they get placed will impact mast placement.
I assume this is correct:
https://picasaweb.google.com/114717787929554738224/BuildingWoodenBoatCLCNortheasterDory?authkey=Gv1sRgCKCBzczm_aKs2wE#5962941210040741714
Not this one:
https://picasaweb.google.com/114717787929554738224/BuildingWoodenBoatCLCNortheasterDory?authkey=Gv1sRgCKCBzczm_aKs2wE#5962941271954149954
Look correct?
Thanks!
Curt 817 456 2878
5 replies:
RE: Mast Thwart Knee Placement On Dory
Hi Moonchahser. FYI...Fawn is the boat that I built in Maine ,and finished back home.
You are welcom to call me at 925 899 6158. Have fun with the build.
Jr buckingham
RE: Mast Thwart Knee Placement On Dory
The dory page used to have a "dory lug addendum" with construction pictures. It now appears to have been replaced with another link to lug contruction which was not functioning when I tried to open it. In any event, I used the former addendum when building my dory. Checking the boat this morning shows the long end of the knee facing the stern, that is, toward the nearest bulkhead. That gives a slight rake to the mast. It all works great.
RE: Mast Thwart Knee Placement On Dory
JR,
....excellent...I posted some new pictures of my inner rail progress (trying to make it look like yours) in my photo journal showing the subject of my questions when we talk (the last 5 pictures)
Frank,
Good...thanks for checking. I also have the addendum (bought it years ago) but the lighting in the black and white pictures is not good, plus the view is blocked by a clamp, so thanks for confirming!
RE: Mast Thwart Knee Placement On Dory
Curt "IT" back up, had a chance to look at your fotos . Thanks for the memories.
It looks like you are well on your way. I will try to sened you some fotos soon.
jr,
Confirmed: Mast Thwart Knee Placement On Dory
» Submitted by Moonchaser - Mon, 12/30/13 » 5:36 PM