Builders' Forum |
|
↓ Scroll to Last Comment ↓ | Forum Guidelines | Builders' Forum | RSS |
Night Heron Hybird build question
I have tacked the hull and am getting ready to fillet my seams. I am assuming I should lay a strip of glass over the fillets but it does not say to do so in the manuel. I am working off my experience building the SW 17 S & G. Seems to me I should but manuel is not clear about it. Thanks, Mark
3 replies:
RE: Night Heron Hybird build question
Mark,
The construction on the Night Heron differs from the Shearwater in regards to taping the fillets. You will be covering the entire interior with a layer of 4 oz rather than taping in the fore and aft compartments.
RE: Night Heron Hybird build question
» Submitted by loube - Mon, 1/17/11 » 8:24 AM
Hi Mark,
The only S&G kayak I have built is a Wood Duck. So I am no expert, but I can not imagne not glassing the fillets. It sure won't hurt anything to just go ahead and do it.
Lou