 |
||||
 |
 |
 |
 |
 |
| Title: | Last Post By: | Posts: |
|---|---|---|
| NE Dory Epoxy Challenges | John, CLC » Mon, 5/8/17 » 12:03 PM | 2 |
| Sanding the weave after first epoxy coat. | Anthony B » Mon, 5/8/17 » 8:18 AM | 0 |
| Sanding weave afer fit epxoy coat. | Anthony B » Mon, 5/8/17 » 8:16 AM | 1 |
| how round should my mast be? | Birch2 » Sun, 5/7/17 » 9:17 PM | 4 |
| Changing the center console on peeler | JEC » Sun, 5/7/17 » 8:30 PM | 0 |
| Laser Friendly Plywood for Boat Building | joshpit2003 » Sun, 5/7/17 » 6:55 PM | 9 |
| Reef Points | Mikeflys » Sun, 5/7/17 » 6:01 PM | 5 |
| filling the weave on the teardrop | riverron » Sat, 5/6/17 » 6:23 PM | 1 |
| Electrical set up | Mkcagle » Fri, 5/5/17 » 10:56 AM | 1 |
| Building oars | Dave Metcalf » Fri, 5/5/17 » 7:29 AM | 6 |
| NE Dory | George C » Thu, 5/4/17 » 11:17 PM | 2 |
| Bridges of cloth at the chine - Ganymede 13' | Alexandre » Thu, 5/4/17 » 11:12 PM | 6 |
| Installing a Seat | Bri C » Thu, 5/4/17 » 1:16 PM | 0 |
| bright lines left on teardrop hull made by the... | Linscott83 » Thu, 5/4/17 » 8:21 AM | 3 |
| using West Systems 410 Microlight Fairing Filler | Arthur Smith » Thu, 5/4/17 » 7:48 AM | 2 |
| Over Sanding | Proavocateur » Thu, 5/4/17 » 12:00 AM | 1 |
| Shearwater Plans | jshaley » Wed, 5/3/17 » 8:57 AM | 5 |
| best practices for cutting plywood from a pattern | Proavocateur » Wed, 5/3/17 » 12:54 AM | 3 |
| Dory oarlock modified | Jacardan2 » Tue, 5/2/17 » 8:17 PM | 6 |
| seat back installation - WDD | wookie » Tue, 5/2/17 » 5:21 PM | 0 |
<< prev [3161-3180] [3181-3200] [3201-3220] [3221-3240] [3241-3260] [3261-3280] [3281-3300] next >>
