 |
||||
 |
 |
 |
 |
 |
| Title: | Last Post By: | Posts: |
|---|---|---|
| Propane heat for Epoxy | Chenier » Wed, 3/17/21 » 6:35 AM | 8 |
| rounding edges | Elliot1234 » Tue, 3/16/21 » 9:57 PM | 21 |
| aluminum sacrilege | Tornado Jim » Tue, 3/16/21 » 3:39 PM | 6 |
| Detail scraper | JohninSD » Tue, 3/16/21 » 3:35 PM | 0 |
| Pinholes in resin filled with sanded [white] resin | hspira » Mon, 3/15/21 » 11:32 PM | 2 |
| Sheer clamp radius at rear of Shearwater 17 Hybrid | spclark » Mon, 3/15/21 » 10:22 PM | 7 |
| Epoxy | Shearwater hybrid builder » Mon, 3/15/21 » 8:14 PM | 17 |
| Skerry - aft seat fit - strange "stepped" pattern | wookmaster » Mon, 3/15/21 » 5:12 PM | 2 |
| Easiest Kayak To Build | Wolfe1959 » Mon, 3/15/21 » 4:48 PM | 2 |
| Cockpit paint for mill creek 16.5 | SteveE914 » Mon, 3/15/21 » 4:13 PM | 2 |
| Mizzen on a Skerry? | Marine Varnisher » Mon, 3/15/21 » 1:15 PM | 4 |
| bottom panel sticks out from joined side panels... | hspira » Sun, 3/14/21 » 9:52 AM | 2 |
| Making a heated tent for curing sheer clamp to... | Shearwater hybrid builder » Sun, 3/14/21 » 8:29 AM | 6 |
| epoxying/varnishing timing | Andrew G » Sat, 3/13/21 » 4:01 PM | 7 |
| Wood filler question | Ripp » Fri, 3/12/21 » 6:22 PM | 6 |
| maintaining an old boat or building my own | Dick Dowdell » Fri, 3/12/21 » 4:17 PM | 10 |
| Pre-Coating panels / bulkheads on Tandem Wherry | CRAMER, BOB » Thu, 3/11/21 » 2:17 PM | 0 |
| Passagemaker waterline | RickW » Wed, 3/10/21 » 2:02 PM | 1 |
| NED vs Peapod | Birch2 » Mon, 3/8/21 » 7:46 PM | 10 |
| Just poking around - night heron hybrid... | hspira » Sun, 3/7/21 » 8:25 PM | 0 |
<< prev [1256-1275] [1276-1295] [1296-1315] [1316-1335] [1336-1355] [1356-1375] [1376-1395] next >>
