Builders' Forum Archives |
Planing MC16 shear clamps
Posted by Gary Ohlin on Mar 9, 2008
I have just finished planing the shear clamps to the arc of the guides and all went well.My concern is with the carlins.If I place a staight edge on the angle of the shear clamp,it projects way over the carlins.With the guide at the forward hanging knee, the carlin is about 1 inch below it. The space does get smaller as it moves toward the rear bulkhead. How does this all pan out when the deck is applied?
Replies:
- Re: Planing MC16 shear cl by Chris J. on Mar 10, 2008
- Re: Planing MC16 shear cl by LeeG on Mar 10, 2008
-
Re: Planing MC16 shear cl by CLC on Mar 10, 2008
- Re: Planing MC16 shear cl by LeeG on Mar 10, 2008
- Re: Planing MC16 shear cl by Gary Ohlin on Mar 11, 2008
-
Re: Planing MC16 shear cl by CLC on Mar 10, 2008