Builders' Forum Archives
Re: Resin bubbles
Posted by Jack on Mar 4, 2008
I drilled 2 very small holes in the bubble. I used a hypodermic needle to push epoxy into the bubble. The other hole was drilled to allow the air to escape as the epoxy was pumped in. Then when I was done with the kayak, Ipanted a string of oak leavs and acorns over the disfigured area. Good luck and have fun. It will be a great craft no matter what.
In Response to: Resin bubbles by Rick LeFlore on Mar 4, 2008
- Re: Resin bubbles by Camper on Mar 5, 2008