Re: re: Transom Reinforce

Posted by Laszlo on Oct 15, 2007

Julie,

That would work, but on the whole I prefer gluing shaped wooden blocks because they're about half the weight of an epoxy endpour (not to mention that epoxy is $0.70 an ounce). My thought was to bed a 3/4 inch thick block in an epoxy/woodflour putty, which would give those sides you mention a good bit of reinforcement, too.

Laszlo

In Response to: re: Transom Reinforcement by Julie K. on Oct 15, 2007

Replies:

No Replies.