Builders' Forum Archives |
glassing procedure
Posted by Eric on Aug 10, 2007
I"m about ready to start glassing the outside hull of my kit and was wondering about the best way. The directions say to lay the cloth over the dry hull, then pour and spread. I was talking to some other people and they recommended that I coat the hull with just the epoxy first, let that dry, then apply the cloth and epoxy over that. Just curious what other people have done and what worked best.
Thanks
Replies:
- Re: glassing procedure by Buff on Aug 10, 2007
- Re: glassing procedure by LeeG on Aug 10, 2007
- Re: glassing procedure by Robert N Pruden on Aug 10, 2007
- Re: glassing procedure by Eric on Aug 10, 2007