Builders' Forum Archives
Re: Shearwater kits
Posted by Shawn on May 18, 2007
This probably got posted in the wrong thread, but I'll continue here so you can find it.
Yes, Interlux said to use Xylol... the pad eyes instructions were linked in my blog, straight from Redfish.. i tried a different method with no better success, so i stuck with theirs. One note, Let the nylon webbing cool completely before removing them from the board sandwich (i clamped them and left them for a while).
In Response to: Re: Shearwater kits by Brad Shook on May 17, 2007