Re: To bevel or to cove?

Posted by Ingrid H on Feb 17, 2007

Wow, I didn't know there was such a kit available from CLC! I'm going to build from plans after it warms up here in Maine. I do plan to cut my own strips. I could use my routers to make my own cove and bead strips, but a few passes with a sharp block plane should make my joinery tight on such a large radius, relatively flat deck. As for keeping in touch with me... You know as much as i do about it. I've never done strip work on a boat. I bet you'll get great results with the strips that come with your CLC kit and if you have any troubles, CLC will help you or you can ask for opinions here in the forum.

In Response to: Re: To bevel or to cove? by Jim Raffini on Feb 17, 2007

Replies:

No Replies.