Builders' Forum Archives
Re: stretching Mill Creek
Posted by Gordon Barton on Nov 1, 2006
Not sure if you have already built a Mill Creek. You might want to check the book out "Kayaks You Can Build", by Ted Moores & Greg Rossel. This has a Mill Creek 13 with lots of details. I seem to remember someone on this forum indicated the Mill Creek was first done on a simple boat design program call "Plyboat". The web site is http://www.plyboats.com/.
This is a very simple program that just about anyone can use, low cost also. You can do both full scale and models of your design, export to DXF (for real cad programs). It has saved me a lot of time.
In Response to: stretching Mill Creek 16 by steve on Oct 31, 2006