Builders' Forum Archives |
Re: minicell bulkheads
Posted by Matthew Keller on Jul 19, 2006
I just made two bulkheads for my Point Bennett and they came out perfect.
I used a T-bevel, 12" ruler, and contour gage to make the templates on cardboard first. I test fit those and then transfered the pattern to plywood. Minicell would be even easier because they don't have to fit so tight.
http://michigankayaker.com
In Response to: minicell bulkheads by brian roberts on Jul 14, 2006
Replies:
No Replies.