Re: My Boat's too long!

Posted by George K on Jul 7, 2006

Bill,

Is the bulkhead in the right place? If it's not you might consider moving it back a few inches. If it is I'd go with glueing a small triangle back there so you don't change the CG. Also the sheer clamp problem is no problem at all. The instructions call for cutting them short on the Chessy models. The end pour takes care of everything. (Okay, there will be a lot of guys here who don't use the end pour for various reasons but all my boats have 'em!)

George K

In Response to: My Boat's too long! by Bill Lapcevic on Jul 7, 2006

Replies: