Builders' Forum Archives |
Graphite epoxy for hull
Posted by jeffrey wong on Jun 14, 2006
Hi builders,
I wish to apply a layer of graphite/epoxy to the hull bottom of my just finished s/g kayak. Can I use the blue masking tape to keep it from bleeding onto the side of the hull or will I require fine line tape?
Replies:
- Re: Graphite epoxy for hu by Mac on Jun 14, 2006
- Re: Graphite epoxy for hu by Darryl Stevens on Jun 14, 2006
-
Re: Graphite epoxy for hu by Chuck Rhodes on Jun 14, 2006
- Re: Graphite epoxy for hu by Darryl Stevens on Jun 14, 2006
-
Re: Graphite epoxy for hu by Chuck Rhodes on Jun 14, 2006
- Re: Graphite epoxy for hu by Robert on Jun 14, 2006
- Re: Graphite epoxy for hu by John F on Jun 14, 2006
- Re: Graphite epoxy for hu by Doug Rhude on Jun 16, 2006
- Re: Graphite epoxy for hu by Laszlo on Jun 16, 2006