Re: bingo

Posted by John F on Apr 3, 2006

I made one new bulhead out of Home Depot EZ panel 1/8 in oak or something, other one I made up difference with a 3/4X3/4 strip custom cut to fit covering the gap. Glued in place with thickened epoxy. This was the bulkhead to deck joint. My screw up; not the kit. The custom made bulkhead was, in the end, the best way to go. Like the man said, that`s the beauty of these kits; be flexible.

In Response to: bingo by LeeG on Apr 2, 2006

Replies:

No Replies.