SS Safety wire

Posted by BobE on Jan 30, 2006

I donna know Laszlo - we use .020" SS safety wire. Usually use a .025 drill bit 'cause it's so hard to find a .020” hole in the wood. Doesn't pull through 3 or 4mm plywood for us. Breaks only a little more often. However your finger tips will suffer. If yer havin' trouble with 18 gauge, man-0-MAN Mac, you don't wanna feel .020"!

http://barefootdave.smugmug.com/photos/39722494-S.jpg

SS wire

In Response to: Re: S&G Wire Cutter by Laszlo on Jan 30, 2006

Replies: