Builders' Forum Archives |
Re: Varnishing
Posted by Parke on Nov 9, 2005
Well for some reason I thought the foam brushes were the way to go. Like everything else on this project, I seem to pick the wrong way first. For my third coat, I'm goint to try the brush (just because I have a good one). If that doesn't work, I'll try the roller. Is it neccessaary to scrape runs between every coat or can it wait until before the last coat?
In Response to: Re: Varnishing by RogerJ on Nov 8, 2005
Replies:
- Re: Varnishing by George K on Nov 9, 2005
- Caviat by Mac on Nov 9, 2005
- Re: Varnishing by Steve Miller on Nov 9, 2005