Builders' Forum Archives |
Re: WR18 flush hatches
Posted by BobE on Oct 5, 2005
I used the CLC flush hatch kit on the 17LT It is a good deal. I made my own for the WR18 because I wanted to use 3mm parts, decorative tabs made from trim wood used elsewhere in the kayak, and thinner gasket material. I also counter sunk the nuts into the lip/spacer stack and trimmed the bolts so nothing is left inside to snag gear.
In Response to: Re: WR18 flush hatches by Mike D on Oct 5, 2005
Replies:
- Re: WR18 flush hatches by Mike D on Oct 5, 2005