Builders' Forum Archives |
Re: Ch 17 LT Bulkheads
Posted by Bill Brennan on Aug 18, 2005
Thanks Lee. The measurement of the max. beam was from the exterior of the hull. I still had the sreader stick in place to keep the shear panels pushed out to the 23 1/2" beam. If I remove the spreader stick the sides come in a enough to allow the aft bulkhead to fit properly into its appointed position. However, the max. beam is now 23".
Bill B.
In Response to: Re: Ch 17 LT Bulkheads by LeeG on Aug 17, 2005
Replies:
- Re: Ch 17 LT Bulkheads by LeeG on Aug 18, 2005
-
Re: Ch 17 LT Bulkheads by Moe on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by LeeG on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by Bill Brennan on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by LeeG on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by Howard on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by LeeG on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by Bill Brennan on Aug 18, 2005
- Re: Ch 17 LT Bulkheads by LeeG on Aug 18, 2005
-
Re: Ch 17 LT Bulkheads by Moe on Aug 18, 2005