Re: STRIP/GLASS

Posted by Kyle T on Jun 22, 2005

I've used both methods also. I find that for the most part the cedar strips really absorb a lot of epoxy. Because of that there can be some areas where it actually starves the glass as it sucks in the epoxy. By doing the pre-coat that can't happen and you are sure to get a uniform wet out.

--KT--

In Response to: STRIP/GLASS by RogerJ on Jun 21, 2005

Replies:

• Re: STRIP/GLASS by Laszlo on Jun 22, 2005
• Re: STRIP/GLASS by RogerJ on Jun 22, 2005