Builders' Forum Archives |
Re: spring back of flush
Posted by LeeG on May 25, 2005
I don't have experience laminating two 4mm pieces to retain the deck curve. What is curious to me is why there's no spring back on a curved hatch made with two pieces of 4mm but there is springback on the older deck beams made with five layers of 4mm Okoume.
In Response to: spring back of flush hatc by Patrick Forrester on May 25, 2005
Replies:
- Re: spring back of flush by patrick forrester on May 25, 2005
-
Re: spring back of flush by LeeG on May 25, 2005
- Re: spring back of flush by patrick forrester on May 25, 2005
- Re: spring back of flush by FrankP on May 26, 2005
- Re: spring back of flush by Dennis Rioux on May 25, 2005
- Re: spring back of flush by patrick forrester on May 25, 2005
-
Re: spring back of flush by George K on May 25, 2005
- Re: spring back of flush by CLC on May 25, 2005
- Re: spring back of flush by patrick forrester on May 25, 2005
- Re: spring back of flush by LeeG on May 25, 2005
- Re: spring back of flush by George K on May 26, 2005
- one spring back formula by BobE on May 25, 2005
-
Re: spring back of flush by LeeG on May 25, 2005