Re: glass on ch17

Posted by Howard on May 22, 2005

eric,

i would recommend that whenever you are glassing entire panels of the boat that you level/ensure the boat is not twisted.

prior to the deck going on, the hull is typically still flexible enough that it will twist if you set it up on un-even supports. so you would not want to lock this in by glassing the bottom without ensuring that the boat is level/not twisted.

i would set it up on level supports, check for twist...then proceed with glassing the bottom.

hs

In Response to: glass on ch17 by Eric on May 21, 2005

Replies:

No Replies.