Builders' Forum Archives
Re: Footbrace mounting
Posted by Alex Cohen on Mar 14, 2005
I've screwed the plastic footpeg rail to a piece of wood (same wood as I used for the shear clamps) sealed with epoxy and then the whole thing epoxied onto the hull of my 16. Seems fine so far. My flatemate did a simliar thing with his Yare, however he used a triangular in cross section sheer clamps, which combined with the geometry of his boat in general so was able to attach it to that instead (see attached picture).
In Response to: Footbrace mounting by Mark on Mar 14, 2005